Home · Automotive Racks · Fascia Front-End Shipping Racks
Fascia & front-end racks.
Returnable steel racks with contoured, cushioned nests that protect painted Class-A fascia and front-end modules — no surface contact, trip after trip.
Painted fascia and front-end modules are Class-A surfaces — a scuff, dent, or scratch means rework or scrap. They need to ship in a contoured nest that supports the part without touching the visible surface. A returnable steel rack built to the fascia does that, and returns to run again. (For rear and structural bumpers, see our bumper racks.)
Why returnable for Class-A fascia
Painted surfaces can't take the abrasion of loose or one-way packaging, and every shipment of expendable packaging is a new cost. A returnable steel rack with contoured nests protects the finish and amortizes over hundreds of trips — run it through the ROI calculator.
- Contoured nests that support the part off the Class-A surface
- Soft contact points that protect paint and finish
- Fixed orientation so fascia present consistently at the line
- Returnable and repairable — low cost per trip
How we protect the finish
We build the nest to the shape of your fascia or front-end module. Steel structure carries the load; custom foam and fabric dunnage support the part at non-visible points and keep anything from touching the painted face.
- Nests contoured to your fascia or front-end module
- Soft, non-marring contact only at safe support points
- No hardware or steel against the Class-A surface
- Secure retention that still protects the finish through the lane
Built to your part, under one roof
We engineer and fabricate every rack in-house — design, laser, forming, welding, powder coat — built to your print and your loop. We also repair and refurbish fleets to keep cost per trip low.
Who ships these
Built for automotive OEM & Tier-1.
We build returnable racks for manufacturers across the Southeast and beyond. See how it fits your world on our automotive OEM & Tier-1 page, or explore all returnable packaging.
FAQ
Fascia Front-End Shipping Racks — answered.
How do you protect the painted Class-A surface?
The nest supports the part only at non-visible points, with soft, non-marring contact. Nothing steel or hard touches the painted face — that's the whole design intent.
Do you build racks for front-end modules, not just fascia?
Yes. We contour the nest to your part, whether it's a fascia, a front-end module, or a full front-end carrier.
What's the difference between this and your bumper racks?
Fascia racks are built around protecting painted Class-A surfaces; our bumper racks cover structural and rear bumpers. We build both to your specific part.
Can the racks present parts the right way at the line?
Yes — orientation is fixed so fascia present consistently for fast, damage-free unload at the point of use.
Can you match or improve our existing fascia racks?
Yes. We build to print, can improve on an existing design, and repair and refurbish fleets to extend service life.
Have a part to quote?
Send a part or a print — a phone photo is enough to start. We’ll come back with a rack concept and a number.
Start an RFQ →